• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
USB Port Mapping
#1
Dear Armin,

Hope you are doing well!

I am working on Modbus RTU node red in our NetPi RTE Gateway using RS485 to USB converter, but not able to mapped the USB port in node red docker container, as we have already done this successfully in last year (thread-653) I have referred this same.

I am getting error while creating the Docker Container if I add "/dev/ttyUSB0" in Devices attached screenshot for your reference.


Br,
Devendra


Attached Files Thumbnail(s)
   
  Reply


Messages In This Thread
USB Port Mapping - by DSongra - August-24th-2021, 07:22 AM
RE: USB Port Mapping - by Armin@netPI - August-24th-2021, 07:30 AM
RE: USB Port Mapping - by DSongra - August-24th-2021, 08:39 AM
RE: USB Port Mapping - by Armin@netPI - August-24th-2021, 10:57 AM
RE: USB Port Mapping - by patribenq - March-10th-2022, 09:05 AM
RE: USB Port Mapping - by Armin@netPI - March-10th-2022, 09:20 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  443 port issue LucioFiam 5 2,357 November-21st-2022, 05:39 PM
Last Post: LucioFiam
  Docker exposed port don't send data on eth0 COswald 3 3,273 July-15th-2021, 02:10 PM
Last Post: Armin@netPI
  Touchscreen with DVI Port Dipro 1 2,262 March-23rd-2021, 09:46 PM
Last Post: Armin@netPI
  Accessing a modbus device connected to RTE port from Node-RED tad 10 8,303 October-2nd-2020, 07:21 AM
Last Post: Armin@netPI
  Receive at startup additional data through the Fieldbus Port Schranz 1 2,917 September-10th-2020, 10:55 AM
Last Post: Armin@netPI
  Ethercat master mapping SteP 1 2,392 March-2nd-2020, 12:42 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 4,855 August-7th-2019, 10:39 AM
Last Post: hannes
  Static mapping of USB-devices deme 11 9,882 May-15th-2019, 04:02 PM
Last Post: Armin@netPI
  [SOLVED] Using netPI's HDMI port Rahulsagar 2 4,089 December-14th-2018, 02:29 PM
Last Post: Rahulsagar
  [SOLVED] USB Serial device mapping into Container hannes 12 14,053 August-27th-2018, 04:50 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)