January-17th-2021, 08:46 PM
Hello Armin,
as you pleased me - here the new issue for the problems we got.
We have also Docker problems, with some containers on very new states of the new bought netPI's. Docker Hub Exports have "architecture": "amd64" in their JSON config and "io.balena.architecture": "armv7hf" - maybe that should be aarch64 or arm64? ( V1.2.2.0 )
Working Docker images have "architecture": "arm".
The from the netPI exported image is seen as an amd64 architecture from other tests on RPI3 and wont work well.
see 78f6ab1d8d9a237a63aa4f12452bdbce0250730523c3ec616d803382ac019aef.json - inside the netPI Node-RED's image.tar
I have the problem again, a fresh installed Hilscher netPI even with original card dies after a few days of running the Docker service and Docker does not start anymore. A reset via USB-Stick helps, but some crashes the Docker Service over time again with a lot of cgroup errors in the syslog as I sent to you, Armin.
Problem of amd64 is on - directly export from netPI (v1.2.2 Barcode end number 2 very new devices and images from docker as well)
The OpenVPN is OK and shows arm architecture.
use Export see https://documentation.portainer.io/v2.0/images/export/
as you pleased me - here the new issue for the problems we got.
We have also Docker problems, with some containers on very new states of the new bought netPI's. Docker Hub Exports have "architecture": "amd64" in their JSON config and "io.balena.architecture": "armv7hf" - maybe that should be aarch64 or arm64? ( V1.2.2.0 )
Working Docker images have "architecture": "arm".
The from the netPI exported image is seen as an amd64 architecture from other tests on RPI3 and wont work well.
see 78f6ab1d8d9a237a63aa4f12452bdbce0250730523c3ec616d803382ac019aef.json - inside the netPI Node-RED's image.tar
I have the problem again, a fresh installed Hilscher netPI even with original card dies after a few days of running the Docker service and Docker does not start anymore. A reset via USB-Stick helps, but some crashes the Docker Service over time again with a lot of cgroup errors in the syslog as I sent to you, Armin.
Problem of amd64 is on - directly export from netPI (v1.2.2 Barcode end number 2 very new devices and images from docker as well)
- hilschernetpi/netpi-codesys-basis
- hilschernetpi/netpi-nodered
- hilschernetpi/netpi-netx-ethernet-lan
- hilschernetpi/netpi-raspian
The OpenVPN is OK and shows arm architecture.
- hilschernetpi/netpi-openvpn
use Export see https://documentation.portainer.io/v2.0/images/export/
