• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Docker not enabled
#11
I have one more question concerning your setup. You said before you are using the device NIOT-E-TPI51-EN-RE. This gateway supports instant cifx0 support without the need of using ethernet-LAN containers. I think we have already talked about it.

The instant cifx0 support on NIOT-E-TPI-EN-RE is provided the time when you activate Node-RED in the devices services control panel. So my question is have you activated Node-RED on your device or not?

If Node-RED is activated then it is in conflict with the Ethernet-LAN container. The version 1.1.1 does not check if cifx0 is already provided and executes and "overwrites" the Node-RED cifx0 setup ... the container 1.1.3 whereas checks if cifx0 is already activated and in this case it denies operation. This might be the root cause of your problem.

Thx
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  https certificate issues in new nodered docker image Dipro 1 1,666 May-4th-2022, 05:46 AM
Last Post: Armin@netPI
  Docker exposed port don't send data on eth0 COswald 3 3,107 July-15th-2021, 02:10 PM
Last Post: Armin@netPI
  Docker amd64 instead of arm biancode 3 3,005 January-17th-2021, 09:40 PM
Last Post: Armin@netPI
  docker.service start failed EUROKEY 13 9,172 January-17th-2021, 07:52 PM
Last Post: Armin@netPI
  Docker cannot find image COswald 16 8,894 May-18th-2020, 07:15 AM
Last Post: COswald
  After „Rebuild“ of Docker neither the node-RED nor the dashboard can be accessed MAK 4 4,233 January-31st-2020, 02:14 PM
Last Post: MAK
  [SOLVED] Docker GUI login issue MGharat 1 2,728 September-19th-2019, 11:50 AM
Last Post: Armin@netPI
Information netPI Docker REST API patrick 1 3,356 July-16th-2019, 02:45 PM
Last Post: patrick
  [SOLVED] Pull Docker Image a.w.d.m. 8 5,004 July-8th-2019, 11:17 AM
Last Post: Armin@netPI
  [SOLVED] Docker issues AlexRegev 7 5,109 June-26th-2019, 02:14 PM
Last Post: AlexRegev

Forum Jump:


Users browsing this thread: 1 Guest(s)