docker.service start failed

[biancode]

Hello everyone,

We have also Docker problems, with some containers on very new states of the new bought netPI's. Docker Hub Exports have "architecture": "amd64" in their JSON config and "io.balena.architecture": "armv7hf" - maybe that should be aarch64 or arm64? ( V1.2.2.0 )

The from the netPI exported image is seen as an amd64 architecture from other tests on RPI3 and wont work well.

see 78f6ab1d8d9a237a63aa4f12452bdbce0250730523c3ec616d803382ac019aef.json - inside the netPI Node-RED's image.tar


I have the problem again, a fresh installed Hilscher netPI even with original card dies after a few days of running the Docker service and Docker does not start anymore. A reset via USB-Stick helps, but some crashes the Docker Service over time again with a lot of cgroup errors in the syslog as I sent to Armin.

Problem of amd64 is on - directly export from netPI (v1.2.2 Barcode end number 2 very new devices and images from docker as well)

• hilschernetpi/netpi-codesys-basis
  
• [b]hilschernetpi/netpi-nodered[/b]
  
• [b][b]hilschernetpi/netpi-netx-ethernet-lan[/b][/b]
  
• [b][b]hilschernetpi/netpi-[/b]raspian[/b]
  

The OpenVPN is OK and shows arm architecture.

• hilschernetpi/netpi-openvpn