Hilscher Community Forum   ›   netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform   ›   Software   ›   Touchscreen with DVI Port

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Touchscreen with DVI Port
Dipro
Junior Member
**
Joined: Aug 2020
Posts: 11

Reputation: 0
#1
March-23rd-2021, 09:37 PM
Hello,

I'm trying to use the hdmi-container (https://hub.docker.com/r/hilschernetpi/n...sktop-hdmi) together with an touchscreen. The touchscreen unfortunately has only a DVI or VGA port. The touchscreen was plugged in during the container deployment, but there isn't any signal on the screen.

On multiple Raspberry Pi forums and tutorials I've seen some workarounds using the config.txt to add certain settings. Can this be done on a netPi? How else is it possible to use a display without a HDMI port (on a different screen with HDMI this was no issue)?

Thanks in advance
Dipro
  Reply


Messages In This Thread
Touchscreen with DVI Port - by Dipro - March-23rd-2021, 09:37 PM
RE: Touchscreen with DVI Port - by Armin@netPI - March-23rd-2021, 09:46 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  443 port issue LucioFiam 5 2,446 November-21st-2022, 05:39 PM
Last Post: LucioFiam
  USB Port Mapping DSongra 5 4,204 March-10th-2022, 09:20 AM
Last Post: Armin@netPI
  Docker exposed port don't send data on eth0 COswald 3 3,349 July-15th-2021, 02:10 PM
Last Post: Armin@netPI
  Accessing a modbus device connected to RTE port from Node-RED tad 10 8,451 October-2nd-2020, 07:21 AM
Last Post: Armin@netPI
  Receive at startup additional data through the Fieldbus Port Schranz 1 2,969 September-10th-2020, 10:55 AM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 4,951 August-7th-2019, 10:39 AM
Last Post: hannes
  [SOLVED] Using netPI's HDMI port Rahulsagar 2 4,158 December-14th-2018, 02:29 PM
Last Post: Rahulsagar

Forum Jump:


Users browsing this thread: 1 Guest(s)