October-16th-2018, 01:25 PM
Hi there,
we have currently an NPIX-CAN module under development. This module can be inserted into netPIs bottom slot and extends netPI by a single CAN interface.
It is more or less the same circuit as used on this type of module designed for the original PI: http://skpang.co.uk/catalog/pican2-canbu...-1475.html. But instead of a D-SUB9 connector our module will get a 5 pin combicon terminal connector with two retaining screws left and right.
The release date is scheduled march 2019.
Thx
Armin
we have currently an NPIX-CAN module under development. This module can be inserted into netPIs bottom slot and extends netPI by a single CAN interface.
It is more or less the same circuit as used on this type of module designed for the original PI: http://skpang.co.uk/catalog/pican2-canbu...-1475.html. But instead of a D-SUB9 connector our module will get a 5 pin combicon terminal connector with two retaining screws left and right.
The release date is scheduled march 2019.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)