• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[INFO] Power connector part number
#1
Information 
For those who misplaced netPI's power connector ...

The type of connector is 3.81 mm centerline, Typ 369, terminal block with label 0/+24V.

We source the connectors through distributor Metz Connect at part number RP034xxVBLN with xx = 03 for three poles.

The manufacturer is RIA connect. The part number is P/N 313691xx with xx = 03 for three poles. Find the data sheet appended.

Thx
Armin


Attached Files
.pdf   riacon 369.pdf (Size: 115.7 KB / Downloads: 9)
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#2
Dear Armin,

Thank you very much for your quick response.
I appreciate it.

Best regards,
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  instant power outage tad 2 2,710 May-5th-2021, 07:06 PM
Last Post: AbigailRoss
  3-pin terminal block for power supply tad 1 2,133 March-2nd-2021, 06:48 AM
Last Post: Armin@netPI
  Power loss and removing power Armin@netPI 3 3,732 October-16th-2020, 06:32 AM
Last Post: Armin@netPI
  [INFO] Hard shutdowns MGharat 5 4,742 February-4th-2020, 07:04 AM
Last Post: Armin@netPI
  Uninterrupted Power Supply TOldengarm 3 3,633 January-21st-2020, 09:51 AM
Last Post: Armin@netPI
  {INFO] FCC grant of certification Armin@netPI 0 1,904 August-2nd-2019, 07:44 AM
Last Post: Armin@netPI
  [INFO] Radio Equipment Directive (RED) certification Armin@netPI 0 1,992 August-2nd-2019, 07:12 AM
Last Post: Armin@netPI
  [INFO] Mechnical tests Armin@netPI 0 2,037 May-6th-2019, 04:35 PM
Last Post: Armin@netPI
  [INFO] CAN bus support for netPI lbruder 4 4,018 February-18th-2019, 10:48 PM
Last Post: Armin@netPI
Information [INFO] 3D CAD model netPI Armin@netPI 0 2,023 February-1st-2019, 03:18 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)