• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
fieldbus in error
#4
It happens during runtime spontaneously. What I noticed is that at the same time all the fieldbus out nodes are still green and all the fieldbus in nodes have the same errror.
  Reply


Messages In This Thread
Answer - by Schranz - February-20th-2018, 04:38 PM
Answer - by Schranz - February-21st-2018, 08:17 AM
Answer - by Armin@netPI - February-21st-2018, 09:31 AM
Answer - by Schranz - February-21st-2018, 09:56 AM
Answer - by Armin@netPI - February-21st-2018, 12:49 PM
Answer - by Schranz - February-22nd-2018, 02:28 PM
Answer - by Schranz - March-7th-2018, 03:31 PM
Answer - by Armin@netPI - March-13th-2018, 07:28 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Initial Setup of Control Panel with admin + admin thorws error Michi 4 2,905 January-28th-2022, 09:28 AM
Last Post: Michi
  cannot execute file: Exec format error - NETPI tuliosouza 1 1,837 January-13th-2022, 01:17 PM
Last Post: Armin@netPI
  netPI opc ua server pull image error wswitula 3 3,256 August-27th-2021, 10:47 AM
Last Post: wswitula
  2 MAC addresses for fieldbus RJ45 ports tad 2 2,235 March-11th-2021, 01:17 PM
Last Post: tad
  Internet on the fieldbus-side COswald 21 9,858 March-1st-2021, 07:41 AM
Last Post: COswald
  HilscherAutomation / netPI-bluetooth entrypoint.sh error bbaskii 6 4,427 September-14th-2020, 04:42 PM
Last Post: bbaskii
  Receive at startup additional data through the Fieldbus Port Schranz 1 2,917 September-10th-2020, 10:55 AM
Last Post: Armin@netPI
  Fieldbus Ports not working Schoko 13 8,997 June-29th-2020, 09:43 PM
Last Post: Armin@netPI
  Error when using a node 'OpcUaServer' tad 6 5,378 May-12th-2020, 08:35 AM
Last Post: tad
  [SOLVED] activate LED1/2 with Node-RED + fieldbus nodes container Christian_Rau 6 4,963 October-21st-2019, 10:30 AM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)