• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] Err lamp is flashing
#1
Hello,

the error lamp on the netPi is flashin.
I used the recovery image, but the lamp is still flashing and I can't reach netPi over the network.

What can I do?

Thanks,

Jonas
#2
Hello Jonas,

"error lamp"? Do you mean the LED named "ERR / MS" ?

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

#3
(November-15th-2018, 10:18 AM)Armin@netPI Wrote: Hello Jonas,

"error lamp"? Do you mean the LED named "ERR / MS" ?

Thx
Armin

Yes, exactly that LED I mean.
#4
But this LED is belonging to the Real-Time Ethernet controller chip on netPI. This chip reacts on any Ethernet network traffic on the 2xRJ45 ports.

So when this LED flashes then there is traffic on the 2xRJ45 ports.

To which Ethernet ports have you connected your Ethernet cable to? To the single port or to the twin-port?
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

#5
(November-15th-2018, 10:53 AM)Armin@netPI Wrote: But this LED is belonging to the Real-Time Ethernet controller chip on netPI. This chip reacts on any Ethernet network traffic on the 2xRJ45 ports.

So when this LED flashes then there is traffic on the 2xRJ45 ports.

To which Ethernet ports have you connected your Ethernet cable to? To the single port or to the twin-port?

I've connected it to the single port.
But we solved it. It were some errors of our Network.
I wasn't sure if the led has something to do with errors on the netpi.

Thanks,

Jonas


Forum Jump:


Users browsing this thread: 1 Guest(s)