[SOLVED] Err lamp is flashing - Printable Version +- Hilscher Community Forum (https://forum.hilscher.com) +-- Forum: netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform (https://forum.hilscher.com/forum-1.html) +--- Forum: Software (https://forum.hilscher.com/forum-5.html) +--- Thread: [SOLVED] Err lamp is flashing (/thread-341.html) |
[SOLVED] Err lamp is flashing - Jonas.Sellmann@outlook.de - November-15th-2018 Hello, the error lamp on the netPi is flashin. I used the recovery image, but the lamp is still flashing and I can't reach netPi over the network. What can I do? Thanks, Jonas RE: Err lamp is flashing - Armin@netPI - November-15th-2018 Hello Jonas, "error lamp"? Do you mean the LED named "ERR / MS" ? Thx Armin RE: Err lamp is flashing - Jonas.Sellmann@outlook.de - November-15th-2018 (November-15th-2018, 10:18 AM)Armin@netPI Wrote: Hello Jonas, Yes, exactly that LED I mean. RE: Err lamp is flashing - Armin@netPI - November-15th-2018 But this LED is belonging to the Real-Time Ethernet controller chip on netPI. This chip reacts on any Ethernet network traffic on the 2xRJ45 ports. So when this LED flashes then there is traffic on the 2xRJ45 ports. To which Ethernet ports have you connected your Ethernet cable to? To the single port or to the twin-port? RE: Err lamp is flashing - Jonas.Sellmann@outlook.de - November-15th-2018 (November-15th-2018, 10:53 AM)Armin@netPI Wrote: But this LED is belonging to the Real-Time Ethernet controller chip on netPI. This chip reacts on any Ethernet network traffic on the 2xRJ45 ports. I've connected it to the single port. But we solved it. It were some errors of our Network. I wasn't sure if the led has something to do with errors on the netpi. Thanks, Jonas |