March-10th-2021, 07:03 AM
Dear Armin,
I installed netpi-netx-ethernet-lan (network=bridge mode) to operate the fieldbus RJ45 ports as standard LAN interface.
There are 2 MAC addresses for Fieldbus are indicated on both of its packing box and the name plate (sticker) on netPI.
But, I can only detect 1 MAC address from an external PC.
The device '/dev/spidev0.0' is added when deploying the container.
But, should 2 device drivers be added for 2 MAC addresses?
That's why only 1 MAC address is detected...
My questions are:
- Does the container 'netpi-netx-ethernet-lan' enable 2 ports of Fieldbus RJ45s to standard LAN interface?
- Is there any measures to confirm 2 MAC addresses from an external PC?
Thank you very much for your support.
Best regards,
I installed netpi-netx-ethernet-lan (network=bridge mode) to operate the fieldbus RJ45 ports as standard LAN interface.
There are 2 MAC addresses for Fieldbus are indicated on both of its packing box and the name plate (sticker) on netPI.
But, I can only detect 1 MAC address from an external PC.
The device '/dev/spidev0.0' is added when deploying the container.
But, should 2 device drivers be added for 2 MAC addresses?
That's why only 1 MAC address is detected...
My questions are:
- Does the container 'netpi-netx-ethernet-lan' enable 2 ports of Fieldbus RJ45s to standard LAN interface?
- Is there any measures to confirm 2 MAC addresses from an external PC?
Thank you very much for your support.
Best regards,
