September-30th-2020, 06:14 AM
(This post was last modified: September-30th-2020, 06:27 AM by Armin@netPI.)
Well I know the Raspbian OS automatically detects which Raspberry Pi is running during boot sequence. So it recognizes whether it is Raspberry Pi 3B or Raspberry Pi 3B+ or Raspberry Pi 4.
But since I am not the developer of Raspbian OS I can tell if this always works 100% or if it is just luck. Due to this point Hilscher can only guarantee that an SD card used on a commercial Raspberry Pi3B will work 100% on netPI. With other Raspberry Pis like Pi3B+ and Pi4 Hilscher cannot guarantee.
But since I am not the developer of Raspbian OS I can tell if this always works 100% or if it is just luck. Due to this point Hilscher can only guarantee that an SD card used on a commercial Raspberry Pi3B will work 100% on netPI. With other Raspberry Pis like Pi3B+ and Pi4 Hilscher cannot guarantee.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
