September-30th-2020, 12:56 PM
(This post was last modified: September-30th-2020, 12:59 PM by Armin@netPI.)
There is one more thing ... which Node-RED container are you loading and using?
I am asking because if you use https://registry.hub.docker.com/r/hilsch...i-nodered/ container then this container configures cifX0 as Node-RED fieldbus and overwrites settings from netx-ethernet-lan container and configured netX chip as PROFINET device instead of standard TCP/IP device.
To configure Node-RED container not to reconfigure netX chip as PROFINET then you have to set the environment variable FIELD to value "none".
I am asking because if you use https://registry.hub.docker.com/r/hilsch...i-nodered/ container then this container configures cifX0 as Node-RED fieldbus and overwrites settings from netx-ethernet-lan container and configured netX chip as PROFINET device instead of standard TCP/IP device.
To configure Node-RED container not to reconfigure netX chip as PROFINET then you have to set the environment variable FIELD to value "none".
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)