• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Accessing a modbus device connected to RTE port from Node-RED
#2
You configured the Ethernet LAN container wrong. Please use it in "HOST" network mode as it is described here in the README here https://registry.hub.docker.com/r/hilsch...ernet-lan/.

Then go to netPI web UI  and login to the standard netPI control panel. In the manu "network/LAN" you will now find next to the "eth0" interface also the "cifx0" interface where you can configure it to any ip address setting you want.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
RE: Accessing a modbus device connected to RTE port from Node-RED - by Armin@netPI - September-29th-2020, 09:42 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Node Red configuration LucioFiam 3 1,823 November-30th-2022, 05:14 PM
Last Post: Armin@netPI
  443 port issue LucioFiam 5 2,357 November-21st-2022, 05:39 PM
Last Post: LucioFiam
  USB Port Mapping DSongra 5 4,082 March-10th-2022, 09:20 AM
Last Post: Armin@netPI
  secure node-red with a username and password Christian_Rau 3 3,052 December-3rd-2021, 11:06 AM
Last Post: Armin@netPI
  cifx0 and Node-Red fabio1975 5 3,316 November-22nd-2021, 01:13 PM
Last Post: Armin@netPI
  Node red web UI issue DSongra 3 3,311 July-22nd-2021, 02:47 PM
Last Post: Armin@netPI
  Node-RED 'projects' possible on netPI? JG_KIT 2 2,447 July-20th-2021, 01:11 PM
Last Post: JG_KIT
  Docker exposed port don't send data on eth0 COswald 3 3,273 July-15th-2021, 02:10 PM
Last Post: Armin@netPI
  Accessing netPI web UI with REST API Armin@netPI 14 8,348 June-30th-2021, 05:06 AM
Last Post: Armin@netPI
  Node-RED: OpcUa Client node tad 4 4,629 June-9th-2021, 08:51 AM
Last Post: tad

Forum Jump:


Users browsing this thread: 1 Guest(s)