June-24th-2020, 08:42 AM
Hello
A.) Yes because of security reasons all netPI setting are reset to default disabled. You have to create a new login and also make changes. And yes first of all you need a DHCP server on eth0 to get netPI web UI access. After that you can change everything. And yes you can use eth0 with DCHP for your test "wifi" only. This is how I did my tests here too during the beginning.
B.) I think you can just switch to "Access point" option and then press "Change". Then there is a screen refresh and new Wifi AP parameters are shown. After you made all your Wifi AP setting then finally press "save"
A.) Yes because of security reasons all netPI setting are reset to default disabled. You have to create a new login and also make changes. And yes first of all you need a DHCP server on eth0 to get netPI web UI access. After that you can change everything. And yes you can use eth0 with DCHP for your test "wifi" only. This is how I did my tests here too during the beginning.
B.) I think you can just switch to "Access point" option and then press "Change". Then there is a screen refresh and new Wifi AP parameters are shown. After you made all your Wifi AP setting then finally press "save"
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
