June-11th-2021, 02:03 AM
Dear Armin,
This thread contains very good information.
I tried to execute the followings.
echo 1 >/proc/sys/kernel/sysrq && echo s > /proc/sysrq-trigger && sleep 3 && echo o > /proc/sysrq-trigger
- I changed 10 to 3 in the 3rd command.
- I changed b to o in the 4th command. It means reBoot to shutdOwn.
The reason for the above is as follows.
- I think 3 seconds are enough to synchronize between memory and microSD card.
- Before turning netPI off, I think 'shutdown' should be selected instead of 'reboot'.
I would like to know your opinion, please.
Thank you very much for your advice.
Best regards,
This thread contains very good information.
I tried to execute the followings.
echo 1 >/proc/sys/kernel/sysrq && echo s > /proc/sysrq-trigger && sleep 3 && echo o > /proc/sysrq-trigger
- I changed 10 to 3 in the 3rd command.
- I changed b to o in the 4th command. It means reBoot to shutdOwn.
The reason for the above is as follows.
- I think 3 seconds are enough to synchronize between memory and microSD card.
- Before turning netPI off, I think 'shutdown' should be selected instead of 'reboot'.
I would like to know your opinion, please.
Thank you very much for your advice.
Best regards,