July-5th-2018, 06:46 AM
By the way I checked for the minimal setup of the container to run virtualhere
It is not necessary
* to map /dev/console into the container
* to enable network = host
* to enable privileged mode
It is necessary
* to map ports 22 and 7575
* to map /dev/ttyUSB0
* to map /dev/bus
and of course "restart always"
It is not necessary
* to map /dev/console into the container
* to enable network = host
* to enable privileged mode
It is necessary
* to map ports 22 and 7575
* to map /dev/ttyUSB0
* to map /dev/bus
and of course "restart always"
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)