• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] How to update firmware
#11
Hi,

you will find a file "HOWTO.text" in your downloaded zip archive ("netPI 2019-07-1 V*.*.*.*.*.*.*.*.zip").
This file contains a more detailed description of the upload procedure.

Excerpt from the howtoo:
"9.) At the end of the procedure the ACT LED stops flashing and goes to state "on" for a second and
then goes to state "off" forever. The recovery is finished."

Please check your USB stick (FAT32 formated, name of usb stick: "RECOVERY" ...).
The contents of the correct image must be unpacked flat on the USB stick.

For netPi Core use: "hilscher-niot-e-npi3-en-V*.*.*.*-recovery.zip"
For netPi RTE use : "hilscher-niot-e-npi3-51-en-re-V*.*.*.*-recovery.zip"

Best Regards
Patrick
#12
Ah, ok. I extracted the actual downloaded .zip onto the USB stick. I now updated the device according to the howto, but when I try to connect to it in Firefox, I get a PR_END_OF_FILE_ERROR. In Chrome I can connect to it, but the https is stroke out.

Edit: Alright I waited 15 minuets and now it just works...
#13
Yeah, that's right too.
The connection is encrypted, but chrome cannot verify the certificate.
This is only possible for public hostnames.

The above warning can be avoided by adding the domain as a security exception.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Software update without factory defaults hannes 3 45 March-19th-2019, 11:57 AM
Last Post: patrick
  Suggestion for NetPi Update process vdupont 3 156 February-14th-2018, 09:32 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)