December-7th-2021, 08:42 PM
If you want to use your made SD card image with a second (backup) netPI ... then this is not so easy since each SD card contains a key file in the folder /nvd/ that fits exactly to the netPI it was in during production time. So once you made an SD card image copy of the original netPI then you have to replace this file in the image first with the one found on the second backup netPI. After replacing the file the SD card copy can be used with the second netPI.
Thx
Armin
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)