March-26th-2021, 05:28 AM
(This post was last modified: March-26th-2021, 08:02 AM by Armin@netPI.)
Hi Christian,
from time to time we are updating the netPI system software and also portainer.io cause of security reasons. Sometimes new portainer versions are not 100% compatible to previous versions as we have documented them ... namings were changed and it is not always easy to recognize and follow them.
Here is where you find the "Env = Environment variables" nowadways:
Anyway you are right, the description should fit 100% and so I will update the container description accordingly.
Three things are important anyway to run cifx0:
Armin
from time to time we are updating the netPI system software and also portainer.io cause of security reasons. Sometimes new portainer versions are not 100% compatible to previous versions as we have documented them ... namings were changed and it is not always easy to recognize and follow them.
Here is where you find the "Env = Environment variables" nowadways:
Anyway you are right, the description should fit 100% and so I will update the container description accordingly.
Three things are important anyway to run cifx0:
- First of all do not use the environment variables to set the ip address etc.. Your aim is it to set it up via netPIs control panel
- Second is use the host mode as described. Only the host mode will bring the cifx0 available to you in netPIs control panel
- Update the netPI system software to the latest version V1.2.2.0. All versions lower than V1.2.2.0 are not showing the cifx0 interface in the netPI control panel. Here you find the system software https://www.netiot.com/netpi/industrial-raspberry-pi-3/ in the download section. In the FAQ section you find how to update netPI Using an USB stick. Use a "fast" USB stick that boots fast else it is not recognized by Raspberry CPU during power on times.
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
