• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HilscherAutomation / netPI-bluetooth entrypoint.sh error
#6
Well, I have not tested it with balena OS. So I can't tell for sure. But the very basic principle of Docker containers - and this is their advantage - is to run on any Linux distribution. So would expect it runs fine there too.

I personally have tested it with Raspbian OS only and of course Hilscher's netPI device. Important is that it needs a Raspberry Pi 3B device. It will not run on a Rpi3B+ since this one has a different BT controller.

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
RE: HilscherAutomation / netPI-bluetooth entrypoint.sh error - by Armin@netPI - September-14th-2020, 06:39 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Initial Setup of Control Panel with admin + admin thorws error Michi 4 2,884 January-28th-2022, 09:28 AM
Last Post: Michi
  cannot execute file: Exec format error - NETPI tuliosouza 1 1,827 January-13th-2022, 01:17 PM
Last Post: Armin@netPI
  netPI opc ua server pull image error wswitula 3 3,241 August-27th-2021, 10:47 AM
Last Post: wswitula
  Bluetooth testing DSongra 6 3,722 April-29th-2021, 06:08 AM
Last Post: DSongra
  Error when using a node 'OpcUaServer' tad 6 5,345 May-12th-2020, 08:35 AM
Last Post: tad
  Bluetooth Access MGharat 10 8,893 February-25th-2020, 12:58 PM
Last Post: DSongra
  netPI Node-Red fieldbus node Error PersEE 5 5,297 October-8th-2019, 03:55 PM
Last Post: Armin@netPI
  error when using GPIO from Python dcatteeu 4 4,708 September-10th-2019, 02:45 PM
Last Post: dcatteeu
  [SOLVED] Bluetooth Functions Jonas.Sellmann@outlook.de 4 3,769 September-21st-2018, 11:16 AM
Last Post: Armin@netPI
  Bluetooth Jonas.Sellmann@outlook.de 11 7,038 April-25th-2018, 06:44 AM
Last Post: Jonas.Sellmann@outlook.de

Forum Jump:


Users browsing this thread: 1 Guest(s)