• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
IP Realtime Ethernet
#3
Well Michu,

if you want netPI to be a PROFINET IO device then this Docker container is the right one for you: https://hub.docker.com/r/hilschernetpi/n...-examples/

You can start a test application with it immediately and there is also a GSDML file in the source code of this conainer that you can import to TIA.

This container https://hub.docker.com/r/hilschernetpi/n...ernet-lan/ is only if you want netX to be a standarc TCP/IP port. It has no PROFINET functionality activated.

Regards
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)



Messages In This Thread
Answer - by michu252 - August-15th-2018, 11:44 AM
RE: IP Realtime Ethernet - by Armin@netPI - August-20th-2018, 03:47 PM
RE: IP Realtime Ethernet - by michu252 - August-21st-2018, 10:32 AM
RE: IP Realtime Ethernet - by Armin@netPI - August-21st-2018, 10:41 AM
Answer - by Armin@netPI - August-16th-2018, 06:57 AM
RE: Answer - by michu252 - August-20th-2018, 03:49 PM
RE: Answer - by Armin@netPI - August-20th-2018, 04:24 PM
RE: Answer - by Armin@netPI - August-20th-2018, 04:47 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  activate Ethernet cifx0 Christian_Rau 3 2,679 March-26th-2021, 05:28 AM
Last Post: Armin@netPI
  Realtime clock tad 4 3,019 September-18th-2020, 10:30 AM
Last Post: tad
  normal ethernet port using for Profinet MGharat 4 4,851 August-7th-2019, 10:39 AM
Last Post: hannes
  RTE3 Use real time ethernet as "normal" ethernet interface hannes 50 26,190 May-9th-2019, 04:28 PM
Last Post: Armin@netPI
  niot-e-npi3-51-en (RS485 <-> Industrial Ethernet) merklethomas 6 5,044 April-26th-2019, 01:38 PM
Last Post: Armin@netPI
  Modbus TCP Connection via RTE Ethernet Ports Flo_Lo 18 12,162 April-15th-2019, 09:50 PM
Last Post: Armin@netPI
  USB/Ethernet adapter slos 4 3,979 April-8th-2019, 09:11 AM
Last Post: slos
  usage of hilschernetpi/netpi-netx-ethernet-lan is working but costs 25% cpu power Michael_d 7 5,228 March-9th-2018, 10:52 AM
Last Post: Michael_d

Forum Jump:


Users browsing this thread: 2 Guest(s)