• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Read/write data from S7 with netPI over Profinet
#5
Yes this is right. netX51 type of chip cannot be a master. It supports device protocol stacks only.

But if you want to let a Rasperry Pi be a PROFINET master (and because netPI is compatible to RPi it works with netPI too) then this is very easy. It goes across the eth0 port using CODESYS SoftPLC. You can test it 2 hours for free then the PLC stops. So you can replace an S7 PLC with a Raspberry Pi or netPI.

Next to PROFINET master, CODESYS can also be EtherNet/IP master or EtherCAT master.

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
RE: Read/write data from S7 with netPI over Profinet - by Armin@netPI - May-25th-2020, 01:12 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  [SOLVED] Storing data on a (remote) database MGharat 20 21,684 June-13th-2022, 03:05 PM
Last Post: Armin@netPI
  Realize your first netFIELD project - write to contact@netfield.io Armin@netPI 0 2,004 December-23rd-2020, 09:39 AM
Last Post: Armin@netPI
  Converter from TCP/IP to ProfiNet WalterSchaefer 8 6,828 August-5th-2020, 08:31 PM
Last Post: WalterSchaefer
  Send Data to Specific Port via UDP Hoeber 2 3,509 July-29th-2020, 09:10 AM
Last Post: Hoeber
  PROFINET to OPC UA data conversion with Node-RED Armin@netPI 0 3,614 July-7th-2020, 12:20 PM
Last Post: Armin@netPI
  Getting data from AllenBradley PLC MarcoMedina 3 4,251 February-26th-2020, 11:53 AM
Last Post: Armin@netPI
  Fetch data from S7 PLC Profibus DP MGharat 3 3,853 March-14th-2019, 11:21 AM
Last Post: Armin@netPI
  netPI as simulator for PROFINET "shared devices" reiboh 1 3,199 January-15th-2018, 05:29 PM
Last Post: Armin@netPI
  IBM sensor data historian and analytics engine for the netPi AlexKoeMuc 0 2,371 November-28th-2017, 01:39 PM
Last Post: AlexKoeMuc

Forum Jump:


Users browsing this thread: 1 Guest(s)