August-24th-2018, 11:34 AM
Hello Hannes,
I have progress by the way.
Instead of an Arduino I used any other ACM compatible device from my stock and connected it to my netPI.
I switched on the privileged mode and mapped /dev/ttyACM0 device while using the raspbian Docker image and it is working fine. See the picture.
But I am using the latest netPI Software V1.1.3.0RC3 from netPI's homepage. Maybe this is the solution.
Please update your netPI and try it again. Then it should work.
Armin
I have progress by the way.
Instead of an Arduino I used any other ACM compatible device from my stock and connected it to my netPI.
I switched on the privileged mode and mapped /dev/ttyACM0 device while using the raspbian Docker image and it is working fine. See the picture.
But I am using the latest netPI Software V1.1.3.0RC3 from netPI's homepage. Maybe this is the solution.
Please update your netPI and try it again. Then it should work.
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)