August-20th-2018, 04:24 PM
(This post was last modified: August-20th-2018, 04:29 PM by Armin@netPI.)
(August-20th-2018, 03:49 PM)michu252 Wrote:(August-16th-2018, 06:57 AM)Armin@netPI Wrote: Hello Michu,
the Real-Time Ethernet interface can only be activated from a Docker container and not from the control panel.
This is because the RTE interface can be PROFINET or EtherNet/IP or EtherCAT on one hand or in simplest case a plain Ethernet LAN interface on the other. And you as a user decide what the purpose of this interface is. Since we cannot predict your use case ... there is no web interface available for the RTE ports.
There are Docker example container images available for
A.) Using the RTE ports as PROFINET, EtherNet/IP, EtherCAT here: https://hub.docker.com/r/hilschernetpi/n...-examples/
B.) Using the RTE ports as standard Ethernet port here: https://hub.docker.com/r/hilschernetpi/n...ernet-lan/
Thx
Armin
Hello Armin
I don't understand the instruction of https://hub.docker.com/r/hilschernetpi/n...-examples/ excactly. I started the excample programm after the installation from the packages, then it came the errorcode: Error CIFX_HOST_STATE_NOT_READY, state 1, error 0x800C0025 what means there is no physical connection, but it is I checked it manytimes... Is there any parametrization of a file who declarate the master device?
Thanks for help
Michu
Ok I got your point. After setting the firmware to PROFINET IO Device and after the proper configuration the test program sets its state to what we call "Host ready" to signal the firmware to be ready to exchange IO. The firmware will then be ready to wait for PROFINET master communication. Now the master has to start communication with the firmware ... and this is what the program is waiting for that the PROFINET master exchanges IO data with the netPI. Ín your case this does not happen and this is why an error is reported.
But in order to let a PROFINET master communicate with a fresh IO device properly you have to assign a name to a PROFINET IO device like described here http://profinews.us/2014/04/whats-in-a-p...vice-name/. Have you done this to netPI?
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)