April-5th-2019, 10:39 AM
(This post was last modified: May-13th-2019, 01:08 PM by Armin@netPI.)
We are providing many netPI example containers/images on netPI's Docker repository here: https://hub.docker.com/u/hilschernetpi/
But sometimes it is good to know that standard containers/images from others work fine as well like the Node-RED container from the Node-RED officials.
The official Node-RED repository is maintained here https://hub.docker.com/r/nodered/node-red-docker/ and there is also a version made for Raspberry Pi.
If you want to deploy it do the following:
STEP 1. Open netPI's website in your browser (https).
STEP 2. Click the Docker tile to open the Portainer.io Docker management user interface.
STEP 3. Enter the following parameters under Containers > + Add Container
Image: nodered/node-red-docker:rpi
Port mapping: host 1880 -> container 1880
Restart policy always
STEP 4. Press the button Actions > Start/Deploy container
STEP 5. Enter the netPIs IP address + port 1880 to show Node-RED e.g. 192.168.0.1:1880
But sometimes it is good to know that standard containers/images from others work fine as well like the Node-RED container from the Node-RED officials.
The official Node-RED repository is maintained here https://hub.docker.com/r/nodered/node-red-docker/ and there is also a version made for Raspberry Pi.
If you want to deploy it do the following:
STEP 1. Open netPI's website in your browser (https).
STEP 2. Click the Docker tile to open the Portainer.io Docker management user interface.
STEP 3. Enter the following parameters under Containers > + Add Container
Image: nodered/node-red-docker:rpi
Port mapping: host 1880 -> container 1880
Restart policy always
STEP 4. Press the button Actions > Start/Deploy container
STEP 5. Enter the netPIs IP address + port 1880 to show Node-RED e.g. 192.168.0.1:1880
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)