Hilscher Community Forum   ›   netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform   ›   Software   ›   multiple netrepns

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
multiple netrepns
Armin@netPI
Product Manager
*******
Joined: Oct 2017
Posts: 1,489

Reputation: 40
#6
July-20th-2021, 02:34 PM
Sounds weird to me ... one more question ... and just for test purposes.

By default the two Industrial Ethernet ports operate as a LAN switch always, independent if PROFINET is configured or not. 

Now if you setup two netPIs inline across the dual LAN ports ... and you start the second one located behind the first netPI device with the PNS example ... are you able to scan it?

Can you please also tell me the two MAC addresses printed on the devices' label so I can verify the production settings of both devices.

Thx
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
multiple netrepns - by royazriel - July-18th-2021, 01:03 PM
RE: multiple netrepns - by Armin@netPI - July-18th-2021, 02:54 PM
RE: multiple netrepns - by royazriel - July-20th-2021, 01:00 PM
RE: multiple netrepns - by Armin@netPI - July-20th-2021, 01:14 PM
RE: multiple netrepns - by royazriel - July-20th-2021, 01:19 PM
RE: multiple netrepns - by Armin@netPI - July-20th-2021, 02:34 PM
RE: multiple netrepns - by Armin@netPI - July-20th-2021, 03:00 PM
RE: multiple netrepns - by royazriel - July-20th-2021, 03:21 PM
RE: multiple netrepns - by Armin@netPI - July-21st-2021, 06:48 AM
RE: multiple netrepns - by royazriel - July-21st-2021, 07:47 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)