June-21st-2021, 10:22 AM
Hi there,
there is no "user setting" or any "wrong setting" I can imagine that is causin and Ethernet trouble after a running period of 20 minutes or similar.
But let me ask you about the 2 MAC addresses of the two units printed on the product label. I have to compare them from their revision. The revision decides on the type of SD card the unit is produced with. Else the netPI device has never ever been changed in any other details since 5 years. So the hardware itself is stable.
If you want you can send me the two MAC addresses also as private message.
Thx
there is no "user setting" or any "wrong setting" I can imagine that is causin and Ethernet trouble after a running period of 20 minutes or similar.
But let me ask you about the 2 MAC addresses of the two units printed on the product label. I have to compare them from their revision. The revision decides on the type of SD card the unit is produced with. Else the netPI device has never ever been changed in any other details since 5 years. So the hardware itself is stable.
If you want you can send me the two MAC addresses also as private message.
Thx
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)