January-25th-2021, 11:10 AM
(This post was last modified: January-25th-2021, 12:42 PM by Armin@netPI.)
To be honest I am not a networking specialist so I don't know what all is needed in all details.
I remember I had tested such a constellation once and one thing I remember was to enable in the firewall setting to set the eth0 interface to status "trusted". Then with an active access point you should be able to ping devices in the eth0 subnet from a PC for example that is connected to this access point as a client.
I remember I had tested such a constellation once and one thing I remember was to enable in the firewall setting to set the eth0 interface to status "trusted". Then with an active access point you should be able to ping devices in the eth0 subnet from a PC for example that is connected to this access point as a client.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
