February-8th-2021, 11:59 AM
(This post was last modified: February-8th-2021, 12:01 PM by Armin@netPI.)
There is no experience with BT at Hilscher at all. There were no demands for it, so noone can tell. The only thing we can tell is that there are two containers available that enables the onboard BT chip controller with BT 4.1 support:
All I can say is that netFIELD Connect gateway uses the same schematics as the Raspberry Pi 3B, so all informations you find on the Internet about meshing for example are also alid for netFIELD connect. For example I found a post of standard Raspberry Pi 3B user https://makersportal.com/blog/2017/12/31...ork-part-1 who wrote that he was doing meshing. But to be honest I do not know if this is valid information and if it works reallly ... I have no experiences at all with BT. Maybe there are other posts on the internet taking care of BT and meshing and multiple connectios.
I am sorry I cannot help more than that.
- https://hub.docker.com/r/hilschernetpi/netpi-nodered
- https://hub.docker.com/r/hilschernetpi/netpi-bluetooth
All I can say is that netFIELD Connect gateway uses the same schematics as the Raspberry Pi 3B, so all informations you find on the Internet about meshing for example are also alid for netFIELD connect. For example I found a post of standard Raspberry Pi 3B user https://makersportal.com/blog/2017/12/31...ork-part-1 who wrote that he was doing meshing. But to be honest I do not know if this is valid information and if it works reallly ... I have no experiences at all with BT. Maybe there are other posts on the internet taking care of BT and meshing and multiple connectios.
I am sorry I cannot help more than that.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)