September-9th-2020, 02:53 PM
Well I just can give you the information for Raspberry Pi host system and here the SPI frequeency can go up to 125Mhz like it is described here https://www.raspberrypi.org/documentatio.../README.md
But I can tell you that physical measurements with Raspberry CPU and netX SPI result in maximaum frequency of 25Mhz. So the netX driver configures the SPI frequency to 25Mhz.
There is no forum for netSHIELD established. The support center decided to establish just a knowledge database on https://kb.hilscher.com/pages/viewpage.a...d=71369521. The support goes accross the www.hilscher.com web site in the support section and email exchange.
Thx
Armin
But I can tell you that physical measurements with Raspberry CPU and netX SPI result in maximaum frequency of 25Mhz. So the netX driver configures the SPI frequency to 25Mhz.
There is no forum for netSHIELD established. The support center decided to establish just a knowledge database on https://kb.hilscher.com/pages/viewpage.a...d=71369521. The support goes accross the www.hilscher.com web site in the support section and email exchange.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)