July-20th-2020, 06:16 AM
It is in accordance to the paper you already received from TOSIBOX team named "Lock for Container - Static Routec R0.1. docx". Just two values need to be entered, and "save" needs to be clicked. After this setting a restart of netPI is necessary.
During this test setup the netPI eth0 IP address was set to 10.11.5.252 at 255.255.0.0 subnet mask.
During this test setup the PLC IP address was set to 10.11.5.253.
This is all you need.
Thx
Armin
During this test setup the netPI eth0 IP address was set to 10.11.5.252 at 255.255.0.0 subnet mask.
During this test setup the PLC IP address was set to 10.11.5.253.
This is all you need.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)