May-7th-2020, 12:56 PM
(This post was last modified: May-7th-2020, 12:59 PM by Armin@netPI.)
Hello Irina,
such a driver applies to PC cards named "cifX" in the hilscher product portfolio which feature data transmission over a physical dual-ported memory and PCI signals or mPCIe with DMA support using a netX100 type of chip.
On netPI there is a netX51 populated which does not support a dual-ported memory for data transmission but a serial port memory connected to SPI0.0 port of netX. So there isn't a kernel driver necessary in this case. With netPi we have just the "libcifx.so" only
Thx
Armin
such a driver applies to PC cards named "cifX" in the hilscher product portfolio which feature data transmission over a physical dual-ported memory and PCI signals or mPCIe with DMA support using a netX100 type of chip.
On netPI there is a netX51 populated which does not support a dual-ported memory for data transmission but a serial port memory connected to SPI0.0 port of netX. So there isn't a kernel driver necessary in this case. With netPi we have just the "libcifx.so" only
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)