March-12th-2020, 09:45 AM
(This post was last modified: March-3rd-2021, 12:10 PM by Armin@netPI.)
I went into the available OpenVPN tags everybody can load from Docker Hub and I see the only tag available is "amd64"
so this means there is no physical image available for ARM cpus. We cannot use it on Raspberry Pi or netPI.
But the readme says "armhf" is supported
but physically it is not. So sorry for this confusion. I did not check from the beginning the real availability of the different tags.
At home I am using the same OpenVPN Docker container successfully but at home I am running it on an AMD64 processor.
You need to look for an alternative OpenVPN container. I have no recommendation for you since I do not know any other container.
Thx
Armin
so this means there is no physical image available for ARM cpus. We cannot use it on Raspberry Pi or netPI.
But the readme says "armhf" is supported
but physically it is not. So sorry for this confusion. I did not check from the beginning the real availability of the different tags.
At home I am using the same OpenVPN Docker container successfully but at home I am running it on an AMD64 processor.
You need to look for an alternative OpenVPN container. I have no recommendation for you since I do not know any other container.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
