May-14th-2019, 08:19 AM
(May-14th-2019, 08:06 AM)Armin@netPI Wrote: Hello,
I want to mention the following points
1.) are you sure you have a DHCP running in your network?
2.) what is the status of the LED ACT of your unit?
3.) if you can connect a cable to the HDMI port ... do you see any errors there during the boot sequence? usually you see [ok] marked all in green colour
4.) please read this post https://forum.hilscher.com/Thread-DHCP-D...of-the-box . he need to use "http://NTBxxxxxxxxxx.local" in his network setup
Thx
Armin
Hi,
1.For the first question, how can I sure the Dynamic Host Configuration Protocol is running in my network?
I have change my DNS network to 8.8.8.8 and alternate DNS server to 8.8.4.4
2. The ACT LED is running in the bliking Green pattern.
3. Yes, I see all [OK] and after that nothing happens...
4. I read this forum and tried with the "http://NTBxxxxxxxxxx.local"
These I have tried but I still can't connect to the web browser.
Thank you!