January-9th-2018, 02:56 PM
You can watch the boot process of netPI via its HDMI port. Is there anything you can see like [error] in color red in the log output that could give us a hint what might gone wrong?
The NS LED is an LED coming from the netX network controller chip. By factory default it is loaded with PROFINET software and once the ERR NS LED is red this tells us that it is simply in unconfigured state. This LED has nothing in common with the Linux OS which is responsible for the web frontend's availability and DHCP service.
I suppose something gone wrong with the network/gateway settings between Wifi and/or LAN settings or a kind of overlapping ip addresses. The only thing that helps at this stage is a firmware recovery procedure.
The NS LED is an LED coming from the netX network controller chip. By factory default it is loaded with PROFINET software and once the ERR NS LED is red this tells us that it is simply in unconfigured state. This LED has nothing in common with the Linux OS which is responsible for the web frontend's availability and DHCP service.
I suppose something gone wrong with the network/gateway settings between Wifi and/or LAN settings or a kind of overlapping ip addresses. The only thing that helps at this stage is a firmware recovery procedure.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
