May-15th-2018, 01:45 PM
The main question I have is what happens if you install "Docker" on your Rpi and let then run the same container there. I just want to exclude that this problem is in any relation to netPI plattform itself.
I think you might have recognize that netPI is just a Docker host and not designed to make any in-deep developments and debugging tasks. For netPI a Raspberry Pi 3 is the cheapest development platform you can think of. So please try to run the container on your Rpi3 first and check if it works.
Then a word to the secured communication. Your referenced container "hilschernetpi/netpi-nodered-fieldbus" has no TLS respectively openssl installed by default. Hence no client certificates have been generated in accordance with your secured MQTT broker. Have you uploaded those certificates in your MQTT node-red node correctly?
I think you might have recognize that netPI is just a Docker host and not designed to make any in-deep developments and debugging tasks. For netPI a Raspberry Pi 3 is the cheapest development platform you can think of. So please try to run the container on your Rpi3 first and check if it works.
Then a word to the secured communication. Your referenced container "hilschernetpi/netpi-nodered-fieldbus" has no TLS respectively openssl installed by default. Hence no client certificates have been generated in accordance with your secured MQTT broker. Have you uploaded those certificates in your MQTT node-red node correctly?
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)