May-23rd-2018, 11:05 AM
(This post was last modified: February-18th-2019, 10:42 PM by Armin@netPI.)
Two things have been discussed very often:
1.) First of all make sure you set the system time correctly (manually or via NTP). Else time differences between netPI's system time and the DockerHub time prevents loading an image
2.) Pulling from Docker Hub goes across port 5000. If you are behind a firewall not allowing a pull across port 5000 then pulling an image will not work. I had this case already recognized by on of the netPI user. After he released the port 5000, everything worked fine
3.) make sure you have written the image you want to pull correctly: for example I don't know the image "hilschernetpi/example : latest" you are referring to as well. So for me "No such image" is correct in my eyes. I know an image "hilschernetpi/netpi-nodered-fieldbus" for example.
Thx
Armin
1.) First of all make sure you set the system time correctly (manually or via NTP). Else time differences between netPI's system time and the DockerHub time prevents loading an image
2.) Pulling from Docker Hub goes across port 5000. If you are behind a firewall not allowing a pull across port 5000 then pulling an image will not work. I had this case already recognized by on of the netPI user. After he released the port 5000, everything worked fine
3.) make sure you have written the image you want to pull correctly: for example I don't know the image "hilschernetpi/example : latest" you are referring to as well. So for me "No such image" is correct in my eyes. I know an image "hilschernetpi/netpi-nodered-fieldbus" for example.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
