February-1st-2022, 01:29 PM
Dear Armin,
I think there is a misunderstanding Node-red Modbus RTU flow is stoping only not the whole node-red application.
Now I have plugged RS485 into the USB converter which we used earlier and connected it to the NetFIELD gateway USB port, I just change the interface type from our NIOT-E-NPIX-RS485 module to USB and it is running continuously, same field devices connected.
The observation is below.
Br,
Devendra Songra
I think there is a misunderstanding Node-red Modbus RTU flow is stoping only not the whole node-red application.
Now I have plugged RS485 into the USB converter which we used earlier and connected it to the NetFIELD gateway USB port, I just change the interface type from our NIOT-E-NPIX-RS485 module to USB and it is running continuously, same field devices connected.
The observation is below.
- With RS485 to USB converter - Running Continuously even in multi-drop.
- With our NIOT-E-NPIX-RS485 module - Not Running Continuously randomly communication breaking in muti drop, but with the single device it is working continuously.
Br,
Devendra Songra