November-16th-2021, 12:39 PM
(This post was last modified: November-16th-2021, 01:27 PM by Armin@netPI.)
The HDMI output port of netPI (Raspberry Pi compatible) is driving data right after power on. The graphics controller chip makes a self check right at the beginning and prints out a 16Mio color picture on HDMI automatically. So maybe check your netPI with another monitor or another HDMI 1.3 compatible cable. I had a customer who was telling me his reason of a black screen was the indeed the monitor.
When we are loading the netPIs with software during production process we always have a HDMI monitor connected to each unit , so the HDMI port of each netPI has been tested well before packaging and delivery. So at the moment I would not see netPI as root cause of this problem but more the monitor or the cable.
The log file output looks good to me. So the container is working and it seems a physical problem only.
Thx
Armin
When we are loading the netPIs with software during production process we always have a HDMI monitor connected to each unit , so the HDMI port of each netPI has been tested well before packaging and delivery. So at the moment I would not see netPI as root cause of this problem but more the monitor or the cable.
The log file output looks good to me. So the container is working and it seems a physical problem only.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
