June-16th-2021, 07:55 AM
Hello Madhumati,
netPI is not like a netTAP 100/50 gateway device we offer since years and are made for specific protocol conversions. netPI whereas is an open platfotm anyone can do with it what he wants. So therefor there is not something like a specific ASCII protocol support ... it just has a support for a half-duplex serial port function over NPIX RS232 oder RS485. So in the end netPI is like your PC/notebook which usually has an RS232 COM port by default also ... the physics is there but it needs programming too.
For easy programmin I still recommend the Node-RED tool which has support for serial port. The serial port node supports listening to data streams transparently and also sending data streams transparently. So with this setup you can send and receive anything what you want.
Please keep again in mind that NPIX 232/485 serial port has a limiting in baud rate and parity bit support. Not all serial port encondings can be realized with it.
Thx
Armin
netPI is not like a netTAP 100/50 gateway device we offer since years and are made for specific protocol conversions. netPI whereas is an open platfotm anyone can do with it what he wants. So therefor there is not something like a specific ASCII protocol support ... it just has a support for a half-duplex serial port function over NPIX RS232 oder RS485. So in the end netPI is like your PC/notebook which usually has an RS232 COM port by default also ... the physics is there but it needs programming too.
For easy programmin I still recommend the Node-RED tool which has support for serial port. The serial port node supports listening to data streams transparently and also sending data streams transparently. So with this setup you can send and receive anything what you want.
Please keep again in mind that NPIX 232/485 serial port has a limiting in baud rate and parity bit support. Not all serial port encondings can be realized with it.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
