January-25th-2021, 12:31 PM
Thanks Armin, yes, the default firewall setting is already set to Trusted.
Hi Armin, I found an old question from a customer, it seems that the IP addresses set in the access point must be completely different from those set in the Eth0 port.
So if the Eth0 port is set as IP: 192.168.2.1 and the SubNet: 255.255.255.0 the Wifi Access Point port "must" be IP: 17.100.4.16 Subnet: 255.255.0.0.
This way it works but I don't know why, my skills stop there, as a client of mine says: I'm a technician up to the curve... :-)
Thanks as always for your availability.
Hi Armin, I found an old question from a customer, it seems that the IP addresses set in the access point must be completely different from those set in the Eth0 port.
So if the Eth0 port is set as IP: 192.168.2.1 and the SubNet: 255.255.255.0 the Wifi Access Point port "must" be IP: 17.100.4.16 Subnet: 255.255.0.0.
This way it works but I don't know why, my skills stop there, as a client of mine says: I'm a technician up to the curve... :-)
Thanks as always for your availability.