July-8th-2020, 07:00 AM
(This post was last modified: July-8th-2020, 07:03 AM by Armin@netPI.)
You say the microphone is recognized on a commercial Raspberry Pi if you enable "privileged" mode, correct?
But what happens if you enable "privileged" mode on the netPI too? Have you tried this already?
There is one important point to know in general about Docker and USB. Every time a container is started then Docker makes a snapshot of the connected USB devices and maps them into the container. If you connect USB devices after the container is started they will not be recognized. So make sure you have connected the USB device when you power on netPI and the containers are started later by Docker automatically. Then your are safe.
But what happens if you enable "privileged" mode on the netPI too? Have you tried this already?
There is one important point to know in general about Docker and USB. Every time a container is started then Docker makes a snapshot of the connected USB devices and maps them into the container. If you connect USB devices after the container is started they will not be recognized. So make sure you have connected the USB device when you power on netPI and the containers are started later by Docker automatically. Then your are safe.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
