May-14th-2020, 09:56 AM
Hello Armin,
many thanks, serial port and GPIO are forwarded to the node.js container, second container is running and I see the cixf0 in the control panel -> network -> LAN.
If a IP-address is asigned to the cifx0 in the control panel, the box sends the packets from the node.js-container to the requestet port?
Sample:
eth0: IP-address 192.168.30.155/24
cifx0: IP-address 172.17.1.200/24
In Docker, in the "hilschernetpi/netpi-raspbian"-Container, the node.js wants to establish a ModbusTCP connection to 172.17.1.100.
In my opinion, this should work without any additional task.
Is this right?
Looking forward your reply.
Carsten
many thanks, serial port and GPIO are forwarded to the node.js container, second container is running and I see the cixf0 in the control panel -> network -> LAN.
If a IP-address is asigned to the cifx0 in the control panel, the box sends the packets from the node.js-container to the requestet port?
Sample:
eth0: IP-address 192.168.30.155/24
cifx0: IP-address 172.17.1.200/24
In Docker, in the "hilschernetpi/netpi-raspbian"-Container, the node.js wants to establish a ModbusTCP connection to 172.17.1.100.
In my opinion, this should work without any additional task.
Is this right?
Looking forward your reply.
Carsten