February-9th-2020, 02:48 PM
By the way I don't know the "GSDML_GettingStarted_en.pdf" document so I can't tell what is in there.
And you wrote something about "isochronous mode". This mode is not supported with netPI since the interface between netPI and netX controller is SPI and there is no synchronization possible.
Hilscher supports isochronous mode on high speed PCIe PC cards only that transmit their data via DMA ... but not with netPI. It was never a use case for netPI. Idea of netPI was to just integrate it in industrial ethernet networks alongside a PLC and field IO devices both communicating fast to control application of the factory automation, while netPI just forwards its data to a cloud for example.
And you wrote something about "isochronous mode". This mode is not supported with netPI since the interface between netPI and netX controller is SPI and there is no synchronization possible.
Hilscher supports isochronous mode on high speed PCIe PC cards only that transmit their data via DMA ... but not with netPI. It was never a use case for netPI. Idea of netPI was to just integrate it in industrial ethernet networks alongside a PLC and field IO devices both communicating fast to control application of the factory automation, while netPI just forwards its data to a cloud for example.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)