January-24th-2020, 03:16 PM
Hi there,
watching the video https://www.mathworks.com/videos/install...94266.html requires to setup an SD card with mathlab support package and to use it afterwards in a Raspberry compatible device.
Sine netPI is100% compatible with Raspberry Pi 3B you can use this support package right away. On netPI the SD card slot is internal and hidden and needs opening the housing with 4 screws to get physical access. If you have opened the case, remove the existing SD card (loaded with netPI Hilscher OS) and replace it with another new mathlab loaded SD card in accordance to the video. Please keep the exisiting SD card safe, since if you want to use maybe original netPI software you need it then.
Thx
Armin
watching the video https://www.mathworks.com/videos/install...94266.html requires to setup an SD card with mathlab support package and to use it afterwards in a Raspberry compatible device.
Sine netPI is100% compatible with Raspberry Pi 3B you can use this support package right away. On netPI the SD card slot is internal and hidden and needs opening the housing with 4 screws to get physical access. If you have opened the case, remove the existing SD card (loaded with netPI Hilscher OS) and replace it with another new mathlab loaded SD card in accordance to the video. Please keep the exisiting SD card safe, since if you want to use maybe original netPI software you need it then.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
