October-16th-2019, 11:30 AM
Here is a picture of my setup I made with PROFINET as master. But it is the same as setting up an EtherCAT master. You just have to select a different device to add to your project.
Look how it looks like
First you have to add an Ethernet interface and then an EtherCAT master followed by your EtherCat slaves (in my case PROFINET slaves)
Look how it looks like
First you have to add an Ethernet interface and then an EtherCAT master followed by your EtherCat slaves (in my case PROFINET slaves)
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)