• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[INFO] CODESYS V3.5.15.0 compatibility confirmed
#4
If there is no driver for CODESYS fpr direct accessing the I2C1 bus you could easily deploy another container with Node-RED including a node for the NVRAM. With this container you could realize a Modbus TCP server to NVRAM function. Then from CODESYS you could add a Modus TCP client with the IP address of the second container that gives you read/write access to the NVRAM.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
RE: [INFO] CODESYS V3.5.15.0 compatibility confirmed - by Armin@netPI - October-11th-2019, 07:23 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  compatibility btw RPi 3B and netPI regarding to microSD card tad 4 3,679 September-30th-2020, 09:09 AM
Last Post: Armin@netPI
  PM - develope OPC UA Server using the Codesys Lingyue 5 4,269 January-17th-2020, 11:12 AM
Last Post: Armin@netPI
  Codesys 3.5.14.0 MGharat 5 4,405 October-31st-2019, 12:50 PM
Last Post: Armin@netPI
  Codesys RTE profinet echteler 2 3,524 September-25th-2019, 09:56 AM
Last Post: Armin@netPI
  CODESYS - Control for Raspberry Florian 1 3,879 March-18th-2019, 06:16 PM
Last Post: Armin@netPI
  [INFO]Docker DNS server Armin@netPI 0 1,866 March-7th-2019, 09:02 AM
Last Post: Armin@netPI
  [INFO] CODESYS V3.5.14.0 compatibility confirmed Armin@netPI 0 2,172 February-6th-2019, 01:20 PM
Last Post: Armin@netPI
Heart [INFO] TeamViewer comes to netPI Armin@netPI 0 2,131 February-4th-2019, 04:41 PM
Last Post: Armin@netPI
Information [INFO] Setting the correct timezone in a container Armin@netPI 0 1,740 February-3rd-2019, 08:23 AM
Last Post: Armin@netPI
  [INFO] Best base image to use for own containers Armin@netPI 1 2,838 January-15th-2019, 08:58 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)