September-13th-2019, 02:11 PM
Yes, you're right, I should have made that clear from the start.
For your information:
I tried strace -f as you suggested, but unfortunately, it did not reveal any missing device mapping (/dev/xyz).
I did see calls to mmap, so I enabled the corresponding capability in portainer. In fact, I enabled them all, just to be sure.
Still, no luck. Data does not come through even though the camera receives commands: I hear the camera changing focus during the initialization.
I like the concept of the netPI, but it does not seems a good match for our application.
Thank you for the support,
david.
For your information:
I tried strace -f as you suggested, but unfortunately, it did not reveal any missing device mapping (/dev/xyz).
I did see calls to mmap, so I enabled the corresponding capability in portainer. In fact, I enabled them all, just to be sure.
Still, no luck. Data does not come through even though the camera receives commands: I hear the camera changing focus during the initialization.
I like the concept of the netPI, but it does not seems a good match for our application.
Thank you for the support,
david.