Hilscher Community Forum   ›   netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform   ›   Software   ›   What is needed to be a PROFINET slave (RTE3)

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What is needed to be a PROFINET slave (RTE3)
jkohlmann
Junior Member
**
Joined: Mar 2018
Posts: 1

Reputation: 0
#1
March-6th-2018, 09:33 PM
How much work is needed to use/access ProfiNet (as Device) with netPI RTE3 ?
Do i have to buy a software stack for profiNet ? For usage within a docker image? Or is it part of System software?
The ProfiNet certification process for this device with application is still required, right?

So: what are needed todos and steps by a developer to use netPI RTE3 as ProfiNet device?
  Reply


Messages In This Thread
What is needed to be a PROFINET slave (RTE3) - by jkohlmann - March-6th-2018, 09:33 PM
Answer - by Armin@netPI - March-7th-2018, 06:31 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  communication cycle as EtherCAT slave tad 2 2,218 April-20th-2021, 11:14 AM
Last Post: tad
  Profinet to Siemens PLC j.langlois 4 3,681 January-26th-2021, 06:11 PM
Last Post: j.langlois
  Profinet name lost after reboot Dipro 7 5,035 November-16th-2020, 01:07 PM
Last Post: Armin@netPI
  Profinet stopped working (spidev spi0.0: SPI transfer timed out) Schranz 7 5,214 November-2nd-2020, 04:20 PM
Last Post: Armin@netPI
  netPI profinet device name WalterSchaefer 2 2,593 October-7th-2020, 11:10 AM
Last Post: WalterSchaefer
  how to pick up PROFINET data and store them to OPC UA server on Node-RED/netPI. tad 7 5,865 March-16th-2020, 10:21 AM
Last Post: Armin@netPI
  PROFINET IO startup compilation arpan.patel@slscorp.com 3 2,960 February-24th-2020, 12:47 PM
Last Post: Armin@netPI
  Profinet Startup Time Schranz 3 3,561 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  Codesys RTE profinet echteler 2 3,501 September-25th-2019, 09:56 AM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 4,817 August-7th-2019, 10:39 AM
Last Post: hannes

Forum Jump:


Users browsing this thread: 1 Guest(s)